395_9555.JPG: PowerMadd handguards and universal mounting kit
395_9556.JPG: All the piece you need (and more)
395_9557.JPG: Two brackets fit together...
395_9558.JPG: How the brackets fit together
395_9565.JPG: Make sure you're using the correct bracket for each side
395_9567.JPG: Fit the brackets to the handlebar
395_9570.JPG: Tighten down the brackets with the provided screw (3mm hex)
395_9571.JPG: I put my handguards on the outermost setting
395_9575.JPG: You can mount the handguards to either one of the mount points
395_9576.JPG: Since I used the outermost setting, I put the larger spacer in between the handguard mount points.
395_9577.JPG: Don't forget the lock washers!
395_9578.JPG: Almost done mounting the handguard
395_9579.JPG: Mounted and ready for tightening 
395_9580.JPG: Mounted and ready for tightening
395_9581.JPG: Don't forget this bolt!
395_9582.JPG: The Serow with new handguards
395_9583.JPG: The Serow with new handguards
395_9584.JPG: The Serow with new handguards